Autel MaxiIM IM508S/IM608S II New Released ECU/ETU For BENZ/BMW/Volkswagen

Autel officially launched its brand-new Mercedes-Benz ECU/ETU Clone function on June 3.
Following the successful rollout of Volkswagen and BMW clone functions one after another, the release of this Mercedes-Benz feature marks that Autel’s IMMO product line has fully covered core vehicle models of the three major German luxury brands collectively known as "BBA". This represents not only a major technological breakthrough but also a substantial boost to market competitiveness.

This function need to work with G-box3.

Autel MaxiIM IM508S Link: https://www.obdprice.eu/collections/autel-key-programmer/products/autel-maxiim-im508s-key-fob-programming-tool

Autel MaxiIM IM608S II Link:   https://www.obdprice.eu/collections/autel-key-programmer/products/autel-maxiim-im608s-ii-key-programming-tool

Mercedes Benz

The following ECU cloning function covers models from 2000 to 2019
Supports cloning (Bench mode) for the following 27 ECMs from 4 suppliers for Mercedes Benz:
BOSCH:CRR2,EDC16C2,EDC16C32,EDC16CP31,EDC16CP36,EDC17C43,EDC17C66,EDC17CP01 / EDC17CP10,EDC17CP46(CR60),EDC17CP57_V1(CR43),EDC17CP57_V2(CR61),ME17.7 / ME17.7.8,MED17.7.1,MED17.7.2,MED17.7.3,MED17.7.3.1,MED17.7.5,MED17.7.7,MRD1;

CONTINENTAL:
SID307(CRR1),SID310(CRR1 plus),SIM271DE;
DELPHI:
CRD11、CRD3x.x;
SIEMENS:
SIM271KE

Supports cloning for the following 8 TCUs for Benz:
FSB4 VGS4-0-NAG2 cloning via Bench mode;
FSB4 VGS4-500-NAG2 cloning via Boot mode;
VGS-NAG3,VGS2-FDCT,VGS-FCVT,VGS-FDCT,EGS52,VGS3-FDCT cloning via Bench mode

BMW

The following ECU cloning function covers E/F/G chassis-equipped models up to 2019
Supports cloning (Bench mode) for the following 42 ECMs from 2 suppliers for Bmw:
BOSCH:
EDC16C1,EDC16C31,EDC16C35,EDC16CP35,EDC17C06,EDC17C41,EDC17C50,EDC17C56,EDC17C76 / EDC17CP02,EDC17CP09,EDC17CP45,EDC17CP49,MD1CP002,MD1CP032,MD1CS001 / ME17.2.1,ME17.2.42,MED17.2,MEV17.2,MEV17.2.1,MEVD17.2,MEVD17.2.3,MEVD17.2.4,MEVD17.2.5 / MEVD17.2.6,MEVD17.2.8,MEVD17.2.9,MEVD17.2.G,MEVD17.2.H,MEVD17.2.K / MEVD17.2.P,MEVD17.8.4,MG1CS003,MG1CS024,MG1CS201;
SIEMENS/CONTINENTAL:
MSD80,MSD81,MSD85,MSD87,MSV80,MSV90

Supports cloning (Bench mode) for the following 6 TCUs from 2 suppliers for Bmw:
GETRAG:
F-6HP,F-7DCT300,F-DKG 436 Gen2;
TCM ZF:
F-8HP,F-8HP Gen3,G-8HP

Volkswagen

The following ECU cloning function covers models from 2000 to 2024
Supports cloning (Bench mode) for the following 62 ECMs from 3 suppliers for VAG:
BOSCH:
EDC16C4,EDC16CP,EDC16CP34,EDC16CP34 CRAFTER,EDC16CP34 M&S,EDC16U1,EDC16U31,EDC16U34,EDC17C46,EDC17C54,EDC17C64,EDC17C74,EDC17CP04 / EDC17CP14,EDC17CP20,EDC17CP20_CRAFTER,EDC17CP24,EDC17CP44,EDC17CP54,EDC17CP74 / EDC17U01,EDC17U05,ME17.1.1,ME17.1.6,ME17.5.20,ME17.5.22,ME17.5.24,ME17.5.26,ME17.5.6 / MED17.1,MED17.1.1,MED17.1.10,MED17.1.12,MED17.1.21,MED17.1.27,MED17.1.6,MED17.1.61 /   MED17.1.62,MED17.5,MED17.5.1,MED17.5.2,MED17.5.20,MED17.5.21,MED17.5.25,MED17.5.5 / MED9.1,MED9.1.1,MED9.1.2,MED9.1.5,MED9.5,MED9.5.10;
CONTINENTAL:
Simos 12.1,Simos 12.2,Simos 8.3x,Simos 8.4x,Simos 8.5x,Simos 8.6x;
SIEMENS:
PCR2.1,Simos 6.2,Simos 6.3,Simos 7.1,Simos 7.1A

Supports cloning (Bench mode) for the following 6 TCUs from 3 suppliers for Volkswagen:
BOSCH: DQ380;
CONTINENTAL: DQ400、DQ500;
TEMIC:DQ200_G2_PQ、DQ200D、DQ250_MQB